| Box Feed – JUKI Industrial Sewing Machine Technology |
 |
The box feed technology moves your fabric to allow you to create perfect high-quality stitches on all types of fabrics. The box feed system stays in contact with your fabrics longer for a consistent, reliable seam every time. Piece perfectly without worries of shifting or sliding fabrics. |
|
|
Straight Stitch Slide Plate
Simply slide the front lever to switch to a single needle hole. Sew the lightest fabrics with perfect needle permeation. The single needle plate will not allow fabrics to be pushed into the needle hole. Free motion stitch with precision and perfection. Sew with confidence, when the single needle hole plate is set, only the straight stitch patterns can be selected. |
Needle hole for straight stitches |
Normal needle hole |
|
 |
|
| Float Function Prevents uneven Seams |
 |
By pressing the float button, you can sew with the presser foot slightly raised. By raising the presser foot to float you can sew fabrics without pushing layers or creating uneven seams. This is effective when quilting and sewing appliques. The height of the presser foot can be set from 0 to 2.5mm in increments of 0.1 mm. |
|
|
| Large sewing space |
 |
Enjoy extra space and comfort by adding the accessory table while quilting. |
|
|
|
Speedy Straight Sewing
With a maximum straight sewing speed of 1,050 stitches/min, you can sew fast. |
|
| Automatic Presser Foot Lifting After Thread Trimming / Presser Foot Pivot Function |
Because the presser foot is automatically lifted after automatic thread trimming, you can quickly remove fabrics. |
And when you stop sewing, the needle stops in the down position and presser foot automatically lifts to allow for fabric movement. Sew corners or pivot with ease, when you resume sewing the presser foot automatically and quickly lowers for continuous smooth sewing. |
|
| *These functions can also be switched off. |
|
|
|
| Convenient Sewing Functions |
 |
Piece your quilts with ease using direct stitch selection No.3. Simply align the fabric edges with the edge of the foot, and sew perfect 1/4″ seams. |
|
 |
When free motion (quilt pattern No.01 or 02) is selected, the machine will automatically be set to float mode. While sewing, you can adjust the amount of float with the stitch length dial and smoothly move the quilt.
|
|
|
|
|
Customizing the Machine for Preferred Operation
In addition to the Easy-to-use Quick Select Buttons, customize your operating preferences by combining both the heel switch of the foot controller (Foot Switch) and the Knee-lifting Lever functions. |
|
|
 |
*Only one function can be assigned at a time. *Foot switch function can also be switched off. |
|
 |
You can adjust the starting and reverse stitch speed between three steps of fast, normal, and slow. |
|
|
|
Check the video reference for convenient assistance!
With the combination of assured automatic operation and fine manual control, you can enjoy ideal natural operation.
�Foot Switch Function
�Presser Foot Pivot Function
�Hassle-Free OperationClick here!
https://www.youtube.com/jukihomesewing/videos/watch?v=oF5SRq9Q78k
*You can access the video of JUKI DX series. |
|
|
| A Variety of Stitch Patterns |
 |
The machine includes 287 stitch patterns and 4 alphabetic/numeric fonts. The decorative patterns can be sewn as one point patterns. Up to 10 often-used patterns such as initials can be saved in the memory. |
|
 |
Decorative stitch patterns include stitches inspired by the tradition of crazy quilting. The DX-2000QVP also contains Exclusive Juki quilt stitches know as Random Stitches. |
|
 |
Enjoy even more designs by combining patterns. combine, create and stitch designs such as a beautiful lace braid. |
|
|
|
| Beautiful Corner Sewing of Applique |
 |
The stitch width of the needle can be set to automatically and gradually change to achieve a stitch that gives a beautiful finish even to the corner of an applique or the start /end of a line of sewing. By adjusting the width and length, you can also control the angles of your design. |
|
|
|
| Bonus Specialty Accessories With QVP edition |
  |
*Pearl Attaching Presser Foot
*Presser Foot with Guide
*Cording and Embroidery Presser Foot
*Applique Presser Foot
*Cording Presser Foot (for 3 cords) |
|
|
|
|
| Accessories to Enhance Your Quilting Experience |
 |
*Walking Foot
*Patchwork Presser Foot
*Open Toe Presser Foot
*Quilt Presser Foot
*Edge Sewing Presser Foot
*Thread Stand |
|
|
|
|
|
Stitch Patterns
|
 |
Optional Accessories
|
 Stitch Area Magnifier
Creates 1.4 times magnification to the stitch area. |
 Quilt Presser Foot
(open type)
For free motion sewing. (Front part is open for better visibility). |
 Quilt Presser Foot (transparent type)
For free motion sewing and zigzag free motion sewing. |
|
 |
|
Main Functions / Specifications
|
|
Name
|
DX-2000QVP
|
| Control system |
Computer |
| Number of stitch patterns |
287 |
| Number of available fonts |
4 |
| Buttonhole |
Automatic (sensor system) with clamping plate |
| Cutting width adjustment of the buttonhole |
X |
| Direct stitch pattern selection |
10 patterns |
| Start/stop button |
Green: Ready to start and/or while sewing
Red: Not ready to start
Orange: When the lock stitch button is pressed while the sewing machine is engaged in pattern sewing |
| Maximum stitch speed |
1,050 sti/min |
| Auto thread trimming |
X |
| Automatic needle threader |
Automatic needle threader |
| Thread tension system |
Automatic |
| Automatic lock stitch |
Automatic lock stitch and thread trimming |
| Feed mechanism |
BOX feed mechanism |
| Presser foot pressure adjustment |
Stepless adjustment |
| Drop feed |
X |
| Quick bobbin preparation |
X |
| Bobbin thread winder |
Bobbin winder with independent motor |
| Light |
2 LED lights |
| Straight stitch slide plate |
X |
| Float function |
X |
| Free arm |
X |
| Change in the length/width of stitches |
Dial system |
Number of needle position
(straight stitch/other than straight stitch) |
37 / 3 |
| Pattern (right and left) reverse |
X |
| Twin needle sewing |
X |
| Adjustable starting / reverse stitch speed |
X |
| Lock stitch |
X |
| Low-speed inching sewing |
X |
| Presser foot pivot function |
X |
| Memory function |
10 patterns |
| Presser foot horizontality holder button |
X |
Height of lifting of presser foot
(1 step/2 steps) |
Button system: 6 mm
Lever system: 6 mm / 12 mm |
| Hard case |
Hard case with accessory storage part |
| Knee lifting lever |
X |
| Wide table |
X |
| Foot controller |
Included; with foot switch function |
| Accessories |
Standard presser foot (A)/Zipper presser foot (B)/Overcasting presser foot (C)/Blind stitch presser foot (D)/Buttonhole presser foot (E)/Manual buttonhole presser foot (I)/Walking foot (N)/Open toe presser foot (O)/Patchwork presser foot (P)/Quilt presser foot (Q)/Edge sewing presser foot (R)/Smooth presser foot (T)/Bobbin (4)/Needle set HA X 1 #11(1):#14(1):#16(1):for knit #11(1)/Twin needle/Quilt guide/Auxiliary spool pin/T-shape screwdriver/Ripper/Cleaning brush/Spool cap (large)/Spool cap (Middle)/Spool cap (Small)/Eyelet punch/Thread stand/Wide table/Foot controller/Knee-lifting lever/Power cord/Hard case/Instruction manual/Operation support DVD
*inside the QVP special accessories box: Presser foot with guide/Cording presser foot (for 3 cords)/ Cording and embroidery presser foot / Applique presser foot /Pearl attaching presser foot |
| Dimensions(mm) |
445(W)x291(H)x210(D) |
| Dimensions with hard case(mm) |
510(W)x305(H)x257(D) |
| Arm size |
8.0″x4.4″ (203x112mm) |
| Weight |
10.3kg(21.6lbs) |
|
(Please call before ordering on-line. Delivery area is limited)
